Speco Technologies DVR-PC16 Series Instrukcja Użytkownika

DVR-PC8/16 Series User Manual Includes setup, usage, and troubleshooting information for your DVR ©2007 SPECO TECHNOLOGIES All rights r

10 3.1.6. PC Monitor Output Connect PC monitor to view the image output. DVR-PC8 series supports both PC monitor and Spot monitor. When the anal

11 3.2 DVR-PC16 Series Installation USB Ports No. Functions No. Functions 1 Power Selection Switch 9 MIC Input 2 Power Connection Circuit

12 4. Basic Operation 4.1 Power Connection Check the connection of the peripheral devices of the system and connect the power. When the power c

13 4.3 To Start Recording 12 3 4.3.1. Start Recording [] When the power is connected to the system, recording will start automatically aft

14 2) Set the simple recording time schedule from the [Camera] tap. If the time schedule is not set, the recording will be 24hours. 3) Set

15 4.4 Search Recorded Image Press the [Viewer] button on the main screen, enter a password and a confirm password and then a screen layout as s

16 5. Screen Layout 5.1 Main Screen 1 23 65789101516 412 1714 1113 No. Name No. Name 1 Current Recording Screen 10 Audio Input Indica

17 5.1.1. Current Recording Screen Show the images of the connected cameras. Each channel number of the connected camera and channel name set by

18 5.1.5. System Info Click the logo on the main screen to view the general information of the system. Double click the Speco Technologies log

19 5.1.8. Sensor Event Indicator The indicator flashes when the alarm sensor is operating. Note Double click the sensor indicator with the l

2 Warning Electric Safety To reduce risk of fire or electrical shock, Do not expose this product to rain or any moisture. Cauti

20 5.1.14. Preference (Settings) Selection screen will appear for setting recording section, image quality, desired recording time, motion sen

21 1 2 3 4 5 7 8 9 10 11 12 13 6 7) Preset Name Preset Location Name of the preset number set will be indicated. 8) Auto Move the camera ima

22 5.1.16. Tools Press the Tools button and a menu to adjust the picture quality of the screen, remote connection and sensor activating log fil

23 5.1.17. DVR Location Enter the installed DVR location. Will be indicated on the main screen after it is entered. Press the keyboard button t

24 5.2.1. Searched Screen Displays the images that match the search criteria. Up to maximum of 16 channels can be displayed simultaneously. Cha

25 5.2.5. Search Calendar Select the date to search the recorded images. Press arrow button from each category to select the date. Select

26 5.2.9. Adjust Audio Playback Adjust the audio volume for audio playback. If the volume cannot be adjusted, check the device administrator

27 5.2.11. Zoom In/Out After clicking the button, select the screen for zoom in/out. Click the left button of the mouse and the screen will

28 5.2.14. Adjust Picture Quality Click Image Adjust button to adjust the searched screen. Select each functions and it can be seen directly in

29 5.3 Search Tools 5.3.1. SmartSearch How to Use SmartSearch 1. Select the channel desired to search in the Viewer to 1-channel mode. 2. P

3 Cautions Read all of the instructions and safety information before you plug your DVR into a wall socket. Signs of Caution and Warning Warn

30 5.3.1.1. Play-back Window The green color represents selected area. You can design searching areas with below buttons to catch up the areas

31 5.3.1.6. Search To start, you can select the starting time. When you select the [File Begin] list, it will search for recorded saved file at p

32 Save Screen [] Save the image on the playback screen as BMP or JPG file. Print [] Print the image of the playback screen by the printer. 5.

33 5.3.2. APP The Basic Method to Use the APP 1. Select the channel desired to process in APP in the Viewer to 1-channel mode. 2. [APP] but

34 5.3.2.1. Menu File 1. Open File (): Used to open up the file. (Deactivated) 2. Close File (): Close the file that is open. (Deactiva

35 5.3.2.4. Post-processed Shows revised image. The image gets updated whenever the filter is opened. 5.3.2.5. Processing Modules These are fi

36 Auto Contrast Enhance Increase the color and light intensity of the screen automatically to increase the screen’s resolution. Sharpen Convolu

37 5.3.3. Backup Select the time and save the image in the backup device. These files can be called up in the normal PC (window based). Note

38 Video Backup To save image by Partial Image Backup, 1. Search recording image to save. 2. Click [Pause] button after searching recorded ima

39 5.3.6. Configure Add Printer Click [Add Printer] button to install new printer. 1. Click [Add Printer] button to use the [Add Printe

4 3. Do not touch the product or the power plug, when there is thunder. It may become a reason for electric shock. 4. Do not install the product

40 6. Setting Customized Functions Press the [Setup] button on the system’s main screen and various functions for the system can be set on the P

41 6.1.3. Camera Location Enter installing location of the selected camera. Click on the keyboard icon to display virtual keyboard screen.

42 6.1.6. Motion Detection Area Motion detection area can be selected on the motion detection area screen after the checkmark on the “All Rang

43 6.2 Network In this section, the selections for the Internet, user ID and other options are selected to transmit images using Agent Series rem

44 DNS Input DNS setting when it is needed. Press [OK] button after completing all the settings to apply. 6.2.2. Remote Connection Time Limi

45 6.2.5. Remote Event Notification Allow notification of events to RemoteAgent. DVR can notify to RemoteAgent even though it is not connect

46 6.3 Sensor/Control In the preference tap, set connecting camera to the Sensor and set the sensor for External Output with various other output

47 6.3.3. Select Sensor Select sensor for setting. Cameras Associated with Selected Sensor Select the camera to be associated to the install

48 6.3.7. Recording Mode When you want to record only the images on sensor-detected camera in full frame speed instead of the current recordi

49 6.3.9. Video loss Detection Video loss Detection Select this category and the screen title will appear as “Video loss” when the camera ca

5 Table of Contents 1. SYSTEM STRUCTURE ...

50 6.4 PTZ This setting tap is for camera control. Note The manual may differ because the control functions vary between the manufacturers or

51 6.4.5. Add PTZ Protocol To install new camera protocol, select “Add PTZ Protocol” Port Select the port to install PTZ protocol. Sel

52 6.4.8. Pan/Tilt : Click on the up arrow button to Tilt the camera in upward direction until the desired angle is reached. : Click on the

53 6.4.9. Preset Automatically moves the camera to a preset position. The preset position is the combined settings of pan, tilt, zoom and focu

54 Light The exterior light will be kept on for the duration of entered preset time and automatically shut off when the preset operating time ex

55 6.5 Color Video Input Signal Adjustment allow users to individually adjust camera’s color brightness, contrast, Chroma U, Chroma V, and Hue fo

56 6.6 Display Setting for each recording channel, sequence and password is done in this menu. 6.6.1. Recording Enable/Disable

57 6.6.2. User Management Set up the login and password when logging into the main menu. By clicking [Manage] button, window to set up the use

58 6.6.4. Recording Resolution Shows the present recording resolution size set among “320×240”, “640×240”, “640×480” mode. To adjust the recor

59 6.6.9. Display Division Select a screen mode from 1, 4, 9, 10, 13, 16-split mode. Camera Sequence Selection Select the order of display ca

6 1. SYSTEM STRUCTURE Before going any further, be sure that you have received the following items with your DVR. Components may vary according

60 6.6.10. Automatic Alternation Mode Select “Display Division Rotation Dwell Time” and select alternation time by sliding the selection bar. Au

61 6.7 FPS/Resolution Adjust the frame for each channel of the DVR with this menu. (On the DVR-PC8/16 Series, recording frame setting can be adju

62 6.8 Schedule In this menu, the recorded method per camera can be selected and a schedule may be created for each camera on an hourly basis. T

63 Motion Detection(M): Records only when there is movement. Refer to setting value to see motion sensitivity when there is detection of moveme

64 Edit Adding schedule to all the frames can be accomplished but only frame schedule can be edited for a select day. Click [Edit] button and “FP

65 6.9 System 6.9.1. Upgrade Use CD-R or USB storage device for program upgrade in the DVR. Below is the way to install automatically.

66 6.9.2. Notify by E-mail When Sensor Event Occurs When this box is chosen, e-mail will be sent to the mailbox when there is sensor e

67 6.9.3. Reset Configuration Click the [Initialization] button and all the setting will go back to default. 6.9.4. Export/Import Ex

68 6.10 Digital Deterrent You can hear sound of the stored WAV file when ‘ Enable Voice Guard’ is checked and a motion sensor is operating.

69 7. Instant Playback This is a feature, ideal for users, who are familiar with a VCR. By using VCR buttons, you can quickly and conveniently s

7 2. System Configuration 2.1 DVR-PC8/16 Series Front Panel DVR-PC8/16 No. Functions No. Functions 1 Power Button & Power LED 5 S

70 7.1.1. When [][ ][ ][ ][ ] buttons are pressed. 1) DVR – Playback or Record: In “ VCR Play and Record Mode” , DVR plays back stored vide

71 7.2 VCR Playback and Record Mode 7.2.1. [] Rewind If you press [] button in playback view, the stored files are played backward at twice

72 7.2.3. [] Fast Forward Press [] button in playback view, and stored video data is played at 2x speed. Press [ ] button once more, and video da

73 7.2.6. [] Camera If you press [] button in playback view, a window, where you can select [Single screen mode] and [Multi-screen mode], appe

74 b) Select multi-channels

75 7.3 VCR Record Mode a) When you press [] button, a list appears for the possible storage media you can record in current DVR. Upon selectin

76 7.4 VCR Playback Mode In VCR Play Mode, [], [ ] buttons cannot be used, and you can only watch one channel. At initial play, a file director

77 8. APPENDIX 8.1 Pin Assignment of Alarm Port Refer to the pictures for connecting the pin assignment of alarm port. (DVR-PC8 Series)

78 Block Diagram for Alarm Input 1. Sensor Input: Normal Open (N/O), Normal Close (N/C) 2. Line impedance of cables should be less than 20Ω.

8 2.2 DVR-PC8 Series Back Panel Note Composition may differ according to system model. No. Functions No. Functions 1 Power Selection S

9 3. INSTALLATION 3.1 DVR-PC8 Series Installation This section describes how to connect peripheral devices to DVR-PC8. Connect the peripheral