Speco Technologies CVC230HZ Instrukcja Użytkownika

OPERATION / INSTALLATION MANUAL 200 New Highway, Amityville, NY 11701 www.specotech.com !Speco Technologies is constantly developing product improvem

Up button SET button LEFT button RIGHT button DOWN button Use the six buttons on back of the camera 1. Press the SET button to access the main setup m

3. Change the status of the selected feature using the LEFT or RIGHT button. 4. When completed, move the arrow indicator to ‘EXIT’ and press the SET b

4. You can enter up to 20 characters. 1) Move the cursor to the character entry field using the LEFT or RIGHT button. 2) Use UP, DOWN, LEFT, a

Your camera provides three ‘WHITE BAL’ control modes for your choosing in Adjusting the white balance. 1. Press the SET button to access the main se

When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT

+ Please press the SETUP button. - OFF : MOTION DETECTION mode is cancelled. - ON : Any motion in the selected areas is observed. + Please press

FOCUS SETUP MODE ZOOM TRK ZOOM SPEED D-ZOOM DISP ZOOM MAG ONE-PUSH ON FAST OFF ON ▶ ◀┘ + ONE PUSH: Focus is automatically adjusted just once, after z

FOCUS SETUP MODE ZOOM TRK ZOOM SPEED D-ZOOM DISP ZOOM MAG ONE-PUSH ON FAST ON ON ▶ ◀┘ D-ZOOM : Configure magnification limit from x2~x10 using this

FOCUS SETUP MODE ZOOM TRK ZOOM SPEED D-ZOOM DISP ZOOM MAG ZOOM POS INIT LENS INIT END ONE-PUSH ON FAST OFF ON OFF ON ▶ ◀┘ LENS INIT: Use this feature

IRIS: Set ‘IRIS’ to ‘AUTO’ or ‘MANUAL’. Position the indicator over ‘IRIS’ using the UP or DOWN button and then select the desired iris mode using th

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of unins

AGC (Auto Gain Control) : For brighter images. 1. Position the indicator over ‘AGC’ using the UP or DOWN button. 2. Set ‘AGC’ to the desired mode us

SENS-UP : This feature ensures clear images at night or under low lighting conditions. 1. Position the indicator over ‘SENS-UP’ using the UP or DOWN

USER PRESET: Preset user-Designated configurations using this feature. Position the indicator over ‘USER PRESET’ using the UP or DOWN button and then

- PRESET SAVE : Save configured preset. USER PRESET SETUP PRESET NO. PRESET MODE PRESET SAVE PRESET CLEAR END NO. 1 NO ▶ PRESET DEFINED - PRESET CLEA

-  GROUP SEL -  MASK COLOR -  AREA SEL -  AREA MODE -  TOP -  BOTTOM -  LEFT -  RIGHT : Choose up to eight groups. Each group can consist of four m

SYNC : -  INT -  LL : Internal synchronization. : External line-lock synchronization. It is not available at the moment. SPECIAL SETUP USER PRESET

IMAGE ADJ : -  FREEZE -  H-REV -  V-REV -  SHARPNESS -  COLOR : Use this feature to freeze capture an image. : Use this feature to horizontally inver

MODEL CVC652HZ 23X COLOR ZOOM CAMERA Signal Format NTSC PAL Scanning System 2 : 1 Interlace Pick-Up Device 1/4” Color Sony™ Super-HAD CCD Total P

MODEL CVC652HZ 23X COLOR ZOOM CAMERA Gain Control Low, Middle, High, OFF Selectable White Balance ATW (INDOOR (3,000~10500K),OUTDOOR (1,800~10,500K

1) Camera mounting screw hole 2) Camera mounting screw hole Back 3) Key Buttons 4) Power LED 5) Video Output Jack 6) RS-485 9) Power Input Terminal 8)

: To Move the arrow indicator to up. : To Move the arrow indicator to down. : To Move the arrow indicator to left. : To Move the arrow indicator to ri

7. External Control connector Relaters to the motion detection output signal. Zoom and focus functions can be controlled using external

2) Connecting to Power Each model has a different power input specification. Please check the model type and standard power requirement befo

MAIN SETUP MENU RESET EXIT MOTION DET OFF FOCUS MODE ZOOM SPEED DISP ZOOM MAG LENS INIT ZOOM TRK D-ZOOM ZOOM POS INIT END EXPOSURE BRIGHTNESS AGC E