Speco Technologies DVR-16/IP Instrukcja Użytkownika Pobierz pdf (Strona 41)

Appendix 1: Hard Disk Error Message

Some messages will be shown on the screen when the H.D.D. cannot operate.

 Message: HDD Detect Time Out

Symptom: The system checks H.D.D. but gets no response over 30 seconds

Possible reason: H.D.D. power on failure

Countermeasure: 1). Wait for the DVR resets the H.D.D. automatically; 2). Power off and on

again

 Message: No Hard Disk

Symptom: No HDD has been found by the system.

Possible reason: 1). No H.D.D; 2). H.D.D. detects failure

Countermeasure: 1). Insert a formatted (FAT 32) H.D.D; 2). Check the power/ IDE bus

connectors, ensure they have been connected well; and then insert the

HDD again.

 Message: Check HDD Bus

Symptom: IDE bus error or H.D.D. Master/ Slave jumper error.

Possible reason: 1).The cable of IDE connectors may be damaged; 2). H.D.D. jumper may

not be set to “Master”.

Countermeasure: 1). Check the cable of IDE connectors; it may be damaged; 2). Check the

H.D.D. cable; ensure it has been connected with the cartridge well; 3).

Check H.D.D. jumper; the jumper has to be set to “Master”.

 Message: Unknown HDD

Symptom: 1). The H.D.D. format is not acceptable.

2). The file system is not acceptable.

Possible reason: 1). The H.D.D. had been formatted with “NTFS” file system; 2). The H.D.D.

had been partitioned or the HDD had not been formatted with “FAT32” file

system.

Countermeasure: Enter OSD menu and format the H.D.D. again.

 Message: HDD Detect Fail

Symptom: The HDD is unusable.

Possible reason: Other unknown reasons.

Countermeasure: Exchange the H.D.D. for a new one.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46

Brak uwag

Speco Technologies DVR-16/IP Instrukcja Użytkownika Strona 41